BB00.40-P-0211-00A SAE Viskositätsklassen der Motoren-/Getriebeöle (Alle Werte sind krit. Spezifikationen gemäß ASTM D 3244),
1 cP = 1 mPa s; 1 cSt = 1 mm2/s		 Blatt 211.0

Motorenöle - SAE J300, revised May 2004
(Auszug übersetzt)
SAE-
Viskositätsklassen


Low-Temperature (°C)
Cranking Viscosity
(ASTM D 5293)
(mPa s)

max.		 Low-Temperature (°C) Pumping Viscosity
(ASTM D 4684)
(mPa s)
With No Yield Stress
max.		 Low-Shear-Rate
Kinematische Viskosität
(ASTM D 445)
(mm2/s)
bei 100 °C		 High-Shear-Rate Viscosity
(ASTM D 4683, CEC L-36-A-90
(ASTM D 4741), ASTM D 5481)
(mPa s)
bei 150 °C und 10 6 s-1
min.
min. max.
0 W 6200 bei - 35 60 000 bei - 40 3.8 - -
5 W 6600 bei - 30 60 000 bei - 35 3.8 - -
10 W 7000 bei - 25 60 000 bei - 30 4.1 - -
15 W 7000 bei - 20 60 000 bei - 25 5.6 - -
20 W 9500 bei - 15 60 000 bei - 20 5.6 - -
25 W 13000 bei - 10 60 000 bei - 15 9.3 - -
20 - - 5.6 < 9.3 2.6
30 - - 9.3 < 12.5 2.9
40 - - 12.5 < 16.3 2.9 (0W-40, 5W-40, 10W-40)
40 - - 12.5 < 16.3 3.7 (15W-40, 20W-40, 25W-40, 40)
50 - - 16.3 < 21.9 3.7
60 - - 21.9 < 26.1 3.7

Getriebeöle - Auszug SAE J 306, 1998
Automotive Gear Lubricant Viscosity Classification
SAE Viscosity Grade






Max Temperature for Viscosity of 150,000 cP (°C)

Using ASTM D 2983
Additional low-temperature viscosity requirements may be appropriate for fluids intended for use in light-duty synchronized manual transmission

Kinematic Viscosity at 100°C (cSt)
Using ASTM D 445
min.
Limit must also be met after testing in
CEC L-45-T-93, Method C (20 hours)		 max.



70W - 55
The precision of ASTM D 2983 has not been established for determinations made at temperatures below - 40 °C. This fact should be taken into consideration in any producer consumer relationship.		 4.1 -
75W - 40 4.1 -
80W - 26 7.0 -
85W - 12 11.0 -
80 - 7.0 < 11.0
85 - 11.0 < 13.5
90 - 13.5 < 24.0
140 - 24.0 < 41.0
250 - 41.0 -